Page 6 - Quick tips

PVC channel is a U-shaped plastic profile used for capping, guiding, edge protection and many more....
It has a three-sided cross-section, shaped like the letter "U" but with straight edges. It can fit over the edge of panels and edges or sometimes used as a track. These profiles are versatile and commonly applied in displays, signage or for panel capping purposes. At MKM Extrusions, PVC channels are made from rigid PVC and come in black or white. They are available in a large variety of sizes and are

PVC tubes are often used for general-purpose applications such as modelling, crafts, packaging, flags, conduit, and the construction of simple frames....
It is a hollow profile with a consistent cross-section and is available in round, square or rectangular formats. These tubes are used in a wide range of settings, often for cosmetic or protective purposes such as sleeving or edge protection. At MKM Extrusions, PVC tubing is offered in both rigid and flexible versions. Rigid tubing is supplied in straight

Angle trim is often used for corner protection and edging applications, both indoors and outdoors....
Plastic angle trims are often applied to protect corners on panels, boards, or displays. They help protect exposed edges and offer a clean finish. These profiles are made from external grade rigid PVC, making them suitable for a range of general applications in both interior and exterior settings. They are available in various sizes and in the colours black or white, depending on your particular requirements

Use a fine-toothed saw to cut PVC angle trim. The finer the teeth, the cleaner the cut....
PVC L shaped angle trim is a rigid plastic profile with a fixed 90-degree shape. The saw used to cut angle trim should be fine-toothed as this will give a better result and reduce the risk of chipping or uneven edges. Always make sure the trim is properly secured before cutting. Move slowly and apply consistent pressure to maintain control. PVC angle trims from MKM Extrusions are manufactured from external grade

To cut plastic angle trim corners, use a fine-toothed saw for the best result.
For cutting extruded rigid PVC plastic profiles you will get the best result by using a fine-toothed saw. The finer the teeth the better the cut. Secure the profile and cut steadily and evenly without rushing.

Plastic trim is an extruded profile which is usually made from rigid plastic, used to cover, protect, or finish edges and surfaces....
Most plastic trims produced by MKM Extrusions are made from rigid PVC, and they are all manufactured with the extrusion process. This involves forcing molten PVC raw materials through a shaped die to create continuous profiles with a fixed cross-section. These trims are available in different shapes, including angle trim, flat strips, and channels. They are often used

A plastic angle is a 90-degree L shaped profile made from rigid PVC, often used to protect or finish corners and edges....
Plastic angles are extruded profiles with a fixed 90-degree shape. They are commonly used in applications where basic edge protection or corner finishing is needed. These profiles can help reduce wear on exposed edges and offer a clean, uniform appearance. At MKM Extrusions, plastic angles are made from external grade rigid PVC, which makes them suitable for both indoor and outdoor

Use a fine-toothed saw to cut PVC edge trim cleanly. The finer the teeth, the better the result....
PVC edge trim typically refers to rigid plastic profiles such as angle trims, flat strips or other types of edging profiles. These are mostly manufactured from rigid PVC, which requires a steady and controlled cutting method. A saw with fine teeth helps produce a cleaner cut and reduces the risk of chipping or cracking. If the trim is a small size and manufactured from softer flexible PVC, a sharp utility

Moulding and extrusion are different types of manufacturing processes which shape raw materials and they are often confused....
Molding involves filling a mould with molten raw material, which cools and solidifies, resulting in a 3D product. Extrusion pushes raw molten material through a die/tool, resulting in a continuous length which are called profiles. Molding pushes out of the tool, and extrusion pushes through. As simple explanation is that spagetti is extruded (pushed through) and a chocolate

PVC angle trim can be cut using a fine-toothed saw. Cutting slowly helps reduce the risk of chipping.
PVC angle trims have a rigid 90-degree shape and are made from external grade rigid PVC. To achieve a clean result, it’s best to use a fine-toothed saw. The finer the teeth, the smoother the cut. Always secure the trim properly before cutting, and move the blade through the material with a steady, controlled motion. For very thin profiles, a fine-toothed handsaw or hacksaw could be considered.