Page 8 - Quick tips

Use a fine-toothed saw to cut hard plastic trim cleanly and without damaging the material.

The plastic used in all our plastic angle trims is manufactured from an external grade rigid PVC, and the profiles require a controlled cutting approach. A miter saw with a fine-toothed blade is often used for this, as it delivers clean and accurate cuts without putting stress on the material.

If you don’t have access to power tools, a fine-toothed handsaw or hacksaw could be an option. Just be sure to secure....

PVC angle trim is made from rigid material, and over a long length it may flex slightly. It is not a soft material and cannot be coiled. Ideally you would need a sample of the material you are wanting to bend and then you can test the properties of that particular profile.

Plastic angle trims, such as those offered by MKM Extrusions, are manufactured from an external grade rigid PVC, so they are not soft and cannot be coiled. Using a heat gun to bend PVC trim is discouraged, as it softens the plastic....

A saw with fine teeth is often used when cutting thick plastic edging..

Thicker plastic profiles, including edging, require more robust tools to ensure a smooth and safe cut. A table saw or circular saw provides the stability and power needed to handle the extra material thickness. A fine-toothed saw blade reduces the risk of chipping or cracking. The finer the teeth the better the cut will be.

Before cutting, make sure the plastic trim is firmly secured, and guide the blade slowly through the material....

Use a fine-toothed saw cut PVC edge trim cleanly. If the teeth are as fine as possible it will give a better result. PVC edge trim typically refers to rigid plastic profiles like angle trims, flat strips, or plastic edging profiles. These are usually made from rigid PVC, which requires a precise and steady cutting method. Using a saw with fine teeth improves the end result, with cleaner cuts and reducing the risk of chipping.

It depends on if the edge trim is made from rigid or flexible material....